There are multiple changeable features with the Config Tab. We have highlighted some that may be most useful to know how to use/what they change in the fixture.

Limit Shelf Width

• This feature can be found on the top left of the ‘Configuration’ tab
• The default will be No - click ‘Yes’ to turn it on

• Once turned on you can write in the width you’d like the shelves to be, default is in mm with a conversion to imperial below
• Those shelves which exceed the width will turn red

Go to Config to turn on Fixed Shelf Widths, you can then input the mm you’d like the shelves to be. All exact retailer specific shelf widths by planogram can be found in the planogram excel download, in each scenario tab or in the Fixture Plans view.

N.B. To be used when creating plans from scratch as a guidance, rather than implemented on the live retailer plans (these are already set to the exact shelf widths). Orientation and products going across bays (e.g. beer crates) can also affect the rules set. This won’t affect any share of space analytics in Compare.

Limit Shelf Height

• This feature can be found on the top left of the ‘Configuration’ tab under the Fixed Shelf Dimensions
• The default will be No - click ‘Yes’ to turn it on

• It shows the total height of all bays therefore if 1 bay exceed the height the whole fixture will turn red

Retail Execution Mode (product location on shelf)

• Shelf Site Alignment - this allows the user to change how the products are stacked on the shelves, all can be aligned to the left, on the right or in the centre (default).